Skip to main content
These are the main console terms used on this site. Each entry gives a short meaning and a link to the page that explains the term.

A

  • Activity: The console page that shows one row for each copy that LP-Mimic tried to open, and why a copy did not open. Read Activity log.
  • Add wallet: A button on Copy LP. You paste a wallet’s address, then you watch it or start copying it. Read Add a wallet.
  • Archive wallet: Stops watching and copying a wallet. You can archive a wallet only when it has no open copies. You can restore it later. Read Archive a wallet.
  • Auto copy: A position that LP-Mimic copied on its own from a wallet you copy. Read The positions table.

B

  • Bin: A price step of a Meteora DLMM pool. A position holds liquidity in a range of bins. Read What is DLMM (Meteora).
  • Bin array: A group of 70 price bins of a pool. If your copy needs one that the pool does not have, your wallet pays its rent, and it does not come back. Read Rent.
  • Blocked tokens: A list in Settings of tokens that a copy never opens on, in every filter mode. Read Settings that apply to all your copies.

C

  • Clean up wallet: A button in the wallet menu that closes empty token accounts, so the rent comes back. Read Rent.
  • Close position: In the row menu of a copy on Portfolio. A dialog lets you choose how you receive your funds: sold for SOL, or both tokens. Read Close a copy now.
  • Close to SOL now: The lightning button on an open copy on Portfolio. LP-Mimic closes the position and sells the token for SOL. No dialog opens. Read Close a copy now.
  • Copy: A position in your wallet that follows a position of another wallet. Read How a copy works.
  • Copy filters: Rules that a new copy must pass: the pool size and the token’s market cap, volume, holders and organic score. The modes are Default, Off and Custom. Read Copy filters.
  • Copy LP: The console page where you manage the wallets you copy. Read The Copy LP page.
  • Copy percentage: The size of each copy as a percent of the source’s position. 100 is the same size. Read Copy percentage.
  • Copying: The switch of a wallet on Copy LP. When it is on, LP-Mimic copies the wallet’s new positions. Read Pause one wallet.

D

  • Delay: The time between the source’s transaction and your copy’s transaction. A delay always exists, and the price can move in it. Read The delay.
  • Delayed stop: A limit that closes a copy when its loss stays at or past a percent for a set number of seconds. Read Delayed stop.
  • Discover: The console page that lists wallets that provide liquidity on Meteora DLMM, with their results and ratings. Read Discover wallets.
  • DLMM: Dynamic liquidity market maker. The kind of pool that Meteora runs, where liquidity sits in price bins. Read What is DLMM (Meteora).

E

  • Est. copy cost: An estimate of what a copy loses against its source. It is part of a wallet’s rating. Read Rating.
  • Expected profit: A part of a wallet’s rating. LP-Mimic multiplies it by the trust to get the score. Read Rating.

F

  • Flag: A short warning mark on a wallet in Discover, for example one pool or open loss. A flag never hides a wallet. Read Flags.
  • Free SOL: The SOL your wallet holds outside positions. You can withdraw free SOL only. Read Withdraw.

H

  • Hold: The typical (median) time a position of a wallet stayed open, on Discover. Read The columns.
  • Hold for: The most time a copy keeps a token after the source closes, when Keep tokens after close is on. The choices are 30 s, 1 min, 2 min and 5 min. Read Keep tokens after close.

J

K

  • Keep tokens after close: A switch that makes a copy keep its token for the hold time after the source closes, instead of selling it at once. Read Keep tokens after close.
  • Kept tokens: Tokens that you kept at a close. The result of such a position comes from a price quote, not from SOL you received. Read Kept tokens.

L

  • Least SOL in the pool: A copy filter. A new copy is skipped when the pool holds less SOL than this. It reduces the risk that a source’s sale moves the price in a small pool. Read Copy filters.
  • Loss limit: A limit for all your copies. It pauses all copying when your closed profit falls a set amount of SOL below its best point. Read Loss limit for all copies.

M

  • Manual copy: A position that you chose, on a wallet you copy, and asked LP-Mimic to copy by hand. Read Copy one position by hand.
  • Mark as seen: A button on a Discover row for a wallet that is not on your copy list. It marks the wallet as seen, so you can filter it out later. Read Actions on a row.
  • Max open in total: The most that may be open in copies of one wallet at once. Blank is no limit. Read Max open in total.
  • Max per copy: The most one copy of a wallet may use. Blank is no limit. Read Max per copy.
  • Max priority fee: A setting in Settings → General → Copying. The most that a copy’s open, add, range move, withdrawal or close pays as a priority fee. Read Settings that apply to all your copies.
  • Max token share: In meme protection, the most of the source’s position, by value, that may be the token. Read Meme protection.
  • Meme copy size: In meme protection, the most that a copy may be when meme protection would skip it. Blank skips the copy. Read Meme protection.
  • Meme protection: A setting that skips a new copy when most of the source’s position is the pool’s token, or opens it at the meme copy size. Read Meme protection.

N

  • Network fee: The fee that Solana charges for a transaction, plus a priority fee, higher when the network is busy. Read Network fee.

O

  • Open what fits: A choice in When a copy doesn’t fit. A smaller copy opens, as large as your limits allow. Read When a copy doesn’t fit.
  • Opened outside LP Mimic: A position that you opened from your wallet without LP-Mimic. Read The positions table.
  • Organic score: A number from 0 to 100 from Jupiter that says how real a token’s trading looks. A copy filter can use it. Read Copy filters.

P

  • Pause copying after a loss of: A limit for one wallet. Copying of the wallet pauses when its closed copies lose this much, in SOL. Read Pause copying after a loss of.
  • Pool: A Meteora DLMM market for two tokens. A copy opens in the same pool as its source. Read How a copy works.
  • Pool fee: A field in the Copy position dialog, shown with Range width and Price range. You check these before you copy a position by hand. Read Copy one position by hand.
  • Portfolio: The console page that shows what your wallet holds, your profit and your positions. Read Portfolio and results.
  • Position: Your liquidity in one pool, inside a price range. A copy is a position. Read How a copy works.
  • Price impact: How much a swap moves the price of a pool. It is larger in a small pool. Read Price impact and slippage.
  • Price range: The prices between which a position holds liquidity and earns fees. A copy has the same range as its source. Read What gets copied and what does not.
  • Priority fee: An extra fee that LP-Mimic pays on each copy transaction, so that it goes through. The fee is higher when Solana is busy. It stays under a limit that LP-Mimic sets for every account. For copies, you set Priority fee level and Max priority fee in Settings. Read Network fee.
  • Priority fee level: A setting in Settings → General → Copying: Normal, Medium, High or Very high. A higher level costs more for each copy transaction. Read Settings that apply to all your copies.
  • Privy: The service that runs your login and holds your wallet. Read Account and wallet.
  • Put back: When a source puts the same token into a new position soon after it closed one. Keep tokens after close helps only when a wallet does this. Read How often this wallet puts tokens back.
  • Put in so far: In the deposit dialog, your deposits less your withdrawals. Read Deposit.

R

  • Range width: A field in the Copy position dialog, shown with Pool fee and Price range. You check these before you copy a position by hand. Read Copy one position by hand.
  • Rating: A grade from S+ (best) to D for a wallet on Discover and Copy LP. It looks back and does not promise a result. Read Rating.
  • Rent: A deposit that Solana keeps in every account that holds data, such as a position or a token account. Some rent comes back when the account closes. Read Rent.

S

  • Score: The number behind a rating: the expected profit times the trust. It sets the grade. Read Rating.
  • Sell early on a drop of: A field of Keep tokens after close. LP-Mimic sells the kept token at once when its value in SOL falls this far below its value at the close. Read Keep tokens after close.
  • Skip it: A choice in When a copy doesn’t fit. A copy that does not fit your limits does not open. Read When a copy doesn’t fit.
  • Slippage: The difference between the quoted price of a swap and the price it fills at. For a copy’s purchase, you set the limit in Slippage when buying. Read Price impact and slippage.
  • Slippage when buying: A setting in Settings → General → Copying. When a copy must buy a token first, it may receive up to this much less of the token than quoted. Read Settings that apply to all your copies.
  • Smallest reduced copy: A setting in Settings. A copy that a limit makes smaller is skipped below this size. Read Settings that apply to all your copies.
  • Source: The wallet that you copy. Read How a copy works.
  • Stop copying all: A button in the Copying group of Copy LP. It turns off the Copying switch of every wallet. Open copies stay open. Read Stop copying all wallets.
  • Stop loss at: A limit that closes a copy when its loss reaches a percent of what it put in. Read Stop loss at.

T

  • Take profit at: A limit that closes a copy when its profit reaches a percent of what it put in. Read Take profit at.
  • Tax badge: A mark beside a token that takes a fee on every transfer. It shows the fee. Read Tax badge.
  • Token account: The account in your wallet that holds one kind of token. It holds rent, which comes back when LP-Mimic closes it. Read Rent.
  • Total profit: On Portfolio, the profit of the positions that closed in the range. all time shows your wallet’s worth less your net deposits. Read Total profit.
  • Trading permission: The permission that LP-Mimic has on your wallet. It works only within fixed rules (with one limit — see Security), and it cannot sign a withdrawal. Read What the trading permission can do.
  • Trust: A part of a wallet’s rating. A short, thin or quiet record lowers it, and so do gains that came mostly from one pool. Read Rating.

U

  • Unclaimed fees: Fees that your open positions earned and did not claim yet. Read Balance.

W

  • Wallet menu: The button in the console header that shows your free SOL. It has Deposit, Withdraw, Export private key, Clean up wallet, Add wallet and Sell to SOL. Read Deposit.
  • Wallet reserve: SOL that LP-Mimic never spends on copies. It pays rent, fees and closes. Read Settings that apply to all your copies.
  • Watch: A button on a Discover row. It adds the wallet to your copy list without copying it. The wallet shows under Watching only. Read Actions on a row.
  • Watching only: A group on Copy LP for wallets that you watch and LP-Mimic does not copy. Read The Copy LP page.
  • Win rate: The share of closed positions that made money, out of those that made or lost money. Read Win rate.
  • Withdrawable: The most free SOL that you can withdraw now. Read Withdraw.